23
Red indicates the resident has not been active. Green indicates the resident has been active.
Yellow indicates the residents speech module is set to Away.
Configuring Activity Monitoring
If the resident requires activity monitoring, first select the resident in the resident list as shown
on the page 29. Check the inactivity feature box and click the Save button. This is all that is
required for the resident to appear in the Activity list.
The time the list shown above is reset is controlled by the ‘Automatic Reset Time’ Use the
drop down boxes to choose the hour followed by the minute.
Viewing the Activity page
The activity page can be viewed by logging into the scheme and navigating too
Monitoring/Audit then choose the Activity tab.
The page automatically refreshes every 60 seconds. It is possible to reset the list so everyone
is marked as inactive by pressing the Manual Reset button.