Programming and user guide
D6707281F Page 11 of 24
Editing a trigger
IMPORTANT
: Editing triggers may affect the events held in the memory of the
CareAssist. Therefore, before editing triggers it is advisable to download any
history you wish to keep (see Alarm History section).
Editing a trigger enables you to change the location assigned
to a trigger.
Step 1 - In programming mode, use the up/down keys to
display ‘Edit Trigger’ then press the select key.
Step 2
– Scroll to the trigger you wish to edit. When the
correct trigger ID is displayed, press select.
Step 3
– Then scroll to a new location and press select to
confirm the change. A confirmation beep will be emitted.
Step 3a
– When editing a Universal Sensor (only when set to send
‘Door’, ‘PES Wander’, ‘Bed Absence’ and ‘PIR Standard’ radio
messages) or a PIR movement sensor, the CareAssist provides the
ability to only alert the carer to trigger activations during a specified
period of time each day e.g. at night. In this case, the unit will ask you
to set the ‘Monitoring period’. You can then select either:
24 Hour - the unit will monitor trigger activations 24 hours a day.
Configure
– the unit will ask you to input a start/end time and will only
generate alerts for trigger activations received during this period.
The date and time must be set correctly in the unit for this feature.
Step 4
– To exit, press the down arrow key until the word
‘Exit’ is displayed then press select.