T U N A P. C O M
Service
Information
SI 929_0120
The specifications provided in this Service Information sheet are the results of careful analysis. Any application-related specifications shall be viewed as recommen-
dations based on past experiences. Due to the wide variety of applications and work methods, we are unable to provide binding specifications. Therefore, there exists
no contractual legal relationship, nor will secondary obligations arise from any purchase contracts. Only the most recent version of the Service Information sheet
retains its validity.
TUNAP GmbH & Co. KG | D-82515 Wolfratshausen | Tel. 08171 / 16 00 – 0 | [email protected] | www.tunap.com
Scope of delivery
1.
TUNAP Tool Secondary-Air Cleaning including the connection house with easy connector to the secondary air system.
2.
Service Information / user manual for the TUNAP Tool Secondary-Air Cleaning
1 Holder for cleaner and rinsing
7 Compressed air connection
2 Connection for spray can
8 Stopcock compressed air
3 Seal for connection spray can
9 Stopcock cleaner / rinsing solution
4 Opener or pressurizer for cans
10 Connection house for secondary air system
5 Quick coupling for pressurized air
11 Chain for support of the tool
6 Pressure regulator with pressure gauge
12 Tool suitcase with foam
Before using it the first time please check that the set is complete. If not please contact yout TUNAP partner.
Please check the tool for damage, make shore the houses are tight.
Should you notice anything is not working properly or the tool has some damage, please don´t use it and contact your TUNAP
partner.
1
4
5
6
11
12
10
2
3
7
8
9