Service
Information
SI 938_2519
The specifications provided in this Service Information sheet are the results of careful analysis. Any application-related specifications shall be viewed as recommen-
dations based on past experiences. Due to the wide variety of applications and work methods, we are unable to provide binding specifications. Therefore, there
exists no contractual legal relationship, nor will secondary obligations arise from any purchase contracts. Only the most recent version of the Service Information
sheet retains its validity.
TUNAP GmbH & Co. KG | D-82515 Wolfratshausen | Tel. 08171 / 16 00 – 0 | [email protected] | www.tunap.com
Cleaning fuel injectors in diesel engines
with 938 Injector Intensive Cleaner & 13310V2 Injecto-Clean unit
Introduction
Congratulations on your purchase of the TUNAP Injecto-Clean system and thank you for the trust you have placed in us. The TUNAP
Injecto-Clean system allows you to combine cutting edge technology with high customer satisfaction and sustainable cost reductions.
To ensure full functionality of the system, please carefully read and observe the information compiled in this Service Infor-
mation/Manufacturer Instructions.
Special safety instructions
Please carefully read this Service Information/Manufacturer Instructions in its entirety before bringing the TUNAP Injecto-Clean system
into operation for the first time.
The TUNAP Injecto-Clean system is designed exclusively for professional use in the automotive field and is approved for the following
cleaning tasks:
Cleaning of fuel injection systems in diesel-powered vehicles
Cleaning of fuel injection systems in gasoline-powered vehicles
All safety precautions must be observed in order to avoid damage to the equipment, the injection system being cleaned, as well as
personal injury.
Safety instruction regarding the chemistry
Observe the current safety data sheet.
Use of protective glasses, gloves, and appropriate protective clothing is mandatory when using the
cleaning system.
Synthetic materials and paint must be reliably protected from contact with the cleaning fluid.
The Injecto-Clean system is approved for use with TUNAP Injector Intensive Cleaner Diesel 938 and Injector Intensive
Cleaner Gasoline 937 only. Use of non-approved cleaning chemicals can cause operational or safety problems.
Cleaning system safety notices
Maintenance and service may be performed only by the manufacturer of the cleaning system.
In order to assure safety, use only original TUNAP spare parts and accessories.
Never use the cleaning system in a potentially explosive environment.
If the connection hoses or connection line (power supply) become damaged, replace them immediately.
Scope of delivery
1.
TUNAP Injecto-Clean system, including connection hoses for fuel delivery and return, with quick connectors for the included uni-
versal connection adapter and connection set (Gasoline & Diesel) 11 13330.
2.
Two universal connection adapters for installation of the TUNAP Injecto-Clean system on the vehicle's fuel delivery and return
lines.
3.
Two Separate Service Information/Operating Instructions for using the TUNAP Injecto-Clean system on diesel and gasoline vehi-
cles.
Before bringing the TUNAP Injecto-Clean system into operation, check the delivery for completeness. If the delivery is incomplete,
please contact TUNAP.
Before initial operation, please check for potential defects or damage to the unit or the connection lines.
If defects or damages are discovered, do not bring the unit into operation; contact TUNAP immediately.
