13
Fig. 6: The ground wheel in working position. Fig. 7: The ground wheel in transport position.
8. FILLING THE CONTAINERS
When starting the sowing, it is recommended that the machine is transferred to the field empty.
Fertilizers and seed are brought to the field, for example, with a trailer, and the filling of the till
seed grill is done on the edge of a field. If the machine must be filled far away from the field block
to be sown, the transfer drive with full container loads should be done with caution. The greatest
transfer speed of 30 km/h can be used on steady roads with empty containers. The maximum
speed is with full containers at 15 km / h.
Emptying of the tanks can be monitored:
•
By observing the area meter of the machine, it can be established n how large an
area with a container can be sown. This is done using the on-board Agrocont
computer; the previous meter reading of the filling is in the memory.
•
An alarm will sound when the containers have a certain amount of fertilizer or seed.
Adjustable tank volume
Fertilizer and seed containers have an adjustable dividing wall, so the relationship between tanks,
can be adjusted. Adjustment can be done by opening the locking screws of wall support rods and
by turning the dividing partition to a desired position (Fig. 8). Remember to lock the support rods
following the adjustment. Not that the partitioning wall height can also be adjusted.
Fig. 8. Container partitioning wall control rod.
Summary of Contents for Nova 3000 Star
Page 38: ...38 ANNEX 2 LUBRICATION CHART...
Page 39: ...39...
