background image

 

 

M a n u a l   P / N   6 4 0 8 - 0 0 6 ,   R E V   B

P G E

                                          

P a g e 

1 3

 

 

6.

 

WARRANTY 

6.1.

 

Warranty Policy 

Tulmar  training  PBEs  are  guaranteed  for  90  days  from  the  date  of  shipment  to  the  customer 
against  defects  in  materials  or  workmanship.  If  a  product  is  found  to  be  defective  within  the 
warranty period, the product will be repaired or replaced without charge for parts or labour. 

6.2.

 

Limitations 

The  warranty  is  limited  to  the  original  purchaser  of  a  new  product,  and  is  valid  only  if  the 
product was purchased from Tulmar or an authorized distributor. This warranty does not cover 
routine  maintenance  or  damage  resulting  from  the  failure  to  maintain  the  product  in 
accordance  with  instructions  provided  in  the  User  Manual.  This  warranty also  does not  cover 
damage  during  transport  of  the  product,  ordinary  wear  and  tear  arising  from  use  of  the 
product, or damage that may arise from accidental or intentional misuse or abuse, alteration or 
customization, or repair by unauthorized persons. 

6.3.

 

Remedy 

If a defect arises within the warranty period, contact Tulmar customer service at +1 (613) 632-
1282 or by email t

[email protected]

 with the details of the issue and a copy of the original 

purchase  order.  Product  may  only  be  returned  after  a  Return  Material  Authorization  (RMA) 
number is issued.   

The  cost  and  liability  of  delivering  the  damaged  product  to  Tulmar  or  an  authorized  Tulmar 
repair  facility  are  the  responsibility  of  the  customer.  The  documentation,  packaging  and  the 
enclosed item must be clearly identified with the RMA number. Tulmar, at its sole discretion, 
will  either  repair  or  replace  the  product  with  one  of  functional  equivalence.  Repaired  or 

replacement products will be returned to the customer’s original order destination on a carrier 
and service of Tulmar’s choice.

 

Summary of Contents for 6408-005














Reviews: