Please read and follow all the instructions before using the unit. Calibration, inspections, and
maintenance shall be performed by professionals
Make sure the indicator is on a stable surface.
DO NOT disassemble or modify unit.
DO NOT exceed the rated load limit of the unit.
DO NOT use this product if there are any signs of damage.
DO NOT use for purposes other than weighing.
Keep other electronic equipment away from the unit.
Electrical Safety
Unit must be connected to a GFCI outlet.
Disconnect power before servicing unit.
All operators MUST discharge themselves before servicing unit.
Always pull the plug – not the cord – when disconnecting from the outlet.
DO NOT use if the power cord is worn or damaged
Power cord should only be replaced by certified service technicians using the original parts
SAFETY PRECAUTIONS
PREPARATION & SET UP
If the indicator is powered with an adapter, plug the adapter directly into the “DC” pin located at
the bottom of the indicator.
Always use a wall outlet to avoid interference from other wires
Turn on the indicator when there is no load
Calibrate before weighing when the scale is initially installed or moved to a new location
- 1 -
Summary of Contents for T909
Page 1: ...T909 User s Manual...
