Place Drawer into the Cabinet
Place the drawer back into the cabinet by extending the drawer slides and snapping the rails on the Retaining
Tabs. You may need an assistant to help align the tabs over the drawer slides. Install the Slide Securing Screws
on each side of the Drawer. (See Detail A on Page 2)
Make Sure the Drawer Functions Properly
Open & close the cabinet drawer to make the sure the drawer is firmly attached to the slides. If the drawer
is not firmly attached, remove the drawer, bend the silver tabs outward and replace the drawer.
7. Place cabinet into trunk compartment and slide all the way to the rear of the trunk compartment. When
done correctly the cabinet front will align with the mounted brace supports (See Diagram Below)
8. Place bolts thru the brace support brackets and tighten completely. Tighten brace support brackets that
mount to the rear dash. (See Diagram above)
1406 Fifth Street, SW • Canton, Ohio 44702 • USA
1-800-321-0870 • 330-452-9132 • Fax 330-452-2557
[email protected] • Tufloc.com
