FIG. 10
Attach the
Leg Extension Bench Frame (#4)
to the
Base
Frame (#1)
and secure it into place using one Hex Head Cap Screw 3/8-
16 X 4-1/2 (#78), two Flat Washers SAE 3/8” (#60), and one Nylon Insert
Jam Lock Nut 3/8-16 (#68). Next, attach the
Leg Extension Bench
Frame (#4)
to the
Front Upright (#5)
and secure it into place
using one
Hex Head Cap Screw 3/8-16 X 2-3/4 (#75), two Flat Washers SAE
3/8” (60), and one Nylon Insert Jam Lock Nut 3/8-16 (#68).
Loosely Fasten
: Do not completely fasten this hardware
assembly at this time, as it will be completely fastened later in the
assembly process.
Next, using a rubber mallet, insert one Plastic Insert Cap 2” Sq. (#53) into
the front of the
Leg Extension Bench Frame (#4).
FIG. 9
Caution:
It is recommended to use another person in as-
sisting with this assembly.
Attach the
Front Upright (#5)
to the
Base Frame (#1)
and secure it into
place using one Hex Head Cap Screw 3/8-16 X 2-3/4 (#75), two Flat
Washers SAE 3/8” (#60), and one Nylon Insert Jam Lock Nut 3/8-16
(#68).
Loosely Fasten
: Do not completely fasten this hardware
assembly at this time, as it will be completely fastened later in
the assembly process.
Owner’s Manual: Assembly Instructions
FIG. 11
Locate the
Leg Extension Arm (#8)
, and using a rubber mal-
let, insert one Plastic Insert Cap 1-1/2 Sq. (#50) into the tube-end.
Next, affix the
Leg Extension Arm (#8)
, in the position as shown above,
to the
Leg Extension Bench Frame (#4)
and secure it into place by in-
serting the
Leg Extension Axle 1/2 X 2-3/4 (#14)
through the
Leg
Extension Bench Frame (#4)
and
Leg Extension Arm (#8)
until it be-
comes flush with both sides of the
Leg Extension Bench Frame (#4).
Note:
It is recommended to grease the
Leg Extension Axle 1/2 X
2-3/4 (#14)
with multi-purpose grease prior to assembling.
FIG. 8
This picture depicts the position of the
Front Upright (#5)
, and
where it is going to be assembled on the
Base Frame (#1).
Note
: The
Back Pad Bracket (#12)
has been pre-assembled to the
Front Upright (#5)
by the factory.
4
CFM-550 Compact Frontal Machine
LOOSELY FASTEN
LOOSELY FASTEN
Summary of Contents for CFM-550
Page 20: ...FIG 64 FIG 65 FIG 66 FIG 67 FIG 68 FIG 69 CFM 550 Compact Frontal Machine 19...
Page 21: ...CFM 550 Compact Frontal Machine 20 CFM 550 CABLE MAPPING DIAGRAM FIG C FIG A FIG B FIG D...
Page 22: ...CFM 550 EXPLODED VIEW DIAGRAM CFM 550 Compact Frontal Machine 21...