Step 4 Press Bar Assembly
A
Connect
the
Pivot Arm (#12)
to the
Main Frame (#10)
with the
Pivot Axle 1 X 5 5/8 (#13)
and secure the axle into place
using hardware shown.
B
Attach
the
Swivel Double Pulley Rod (#18)
to the
Pivot Arm (#12)
with the Rod End 1/2-20 X 1 1/2 (#66) and secure
them into place using one Shoulder Bolt 1/2 X 1 1/4 (#72) and one Nylon Insert Lock Nut 3/8-16 (#58).
C
Attach two Pulleys 3/8 X 4 1/2 (#23) to the
Swivel Double Pulley Rod (#18)
using hardware shown. Next, affi x the
Rubber Bumper 3/8 X 2 1/2 (#67) to the
Pivot Arm (#12)
using hardware shown.
D
Connect
the
Press Bar (#15)
to the
Pivot Arm (#12)
with the
Pivot Axle 1 X 5 9/32 (#14)
and secure the axle to the
Press Bar (#15)
using two Soc Set Screws 1/4-20 X 3/8 (#75).
E
Attach the Rubber Bumper 3/8 X 1 1/2 (#68) to the
Press Bar (#15)
using hardware shown.
Assembly List
Item #
Description
Qty.
Item #
Description
Qty.
7
CABLE RETAINER BRACKET
2
43
HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 1 1/4
1
12
PIVOT ARM
1
46
HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 3 1/4
1
13
PIVOT AXLE 1 X 5 5/8
1
56
NYLON INSERT JAM LOCK NUT B/O 3/8-16
2
14
PIVOT AXLE 1 X 5 9/32
1
58
NYLON INSERT LOCK NUT B/O 3/8-16
1
15
PRESS BAR
1
66
ROD END 1/2-20 X 1 1/2 MALE
1
18
SWIVEL DOUBLE PULLEY ROD
1
67
RUBBER BUMPER 3/8 X 2 1/2
1
23
ALUMINUM PULLEY 3/8” X 4 1/2”
2
68
RUBBER BUMPER W/WASHER 3/8 X 1 1/2
1
27
BUTTON HEAD SOCKET CAP SCREW B/O 3/8-16 X 1
2
72
SHOULDER BOLT ALLOY 1/2 X 1 1/4
1
29
CHROME WASHER 3/8 X 1 1/2
2
75
SOCKET SET SCREW ALLOY 1/4-20 X 3/8
2
33
FENDER WASHER B/O 3/8 X 2
1
79
SPLIT LOCK WASHER B/O 3/8”
2
37
FLAT WASHER SAE B/O 3/8”
3
81
STEEL BUMPER WASHER Z/P 3/8”
1
41
HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 1
1
7
AP-5MPS_AP-5MPD Multi-Press Station
