Step 5 Cable Routing
A. Begin
routing
the
Multi-Press Cable (#11)
under the Pulley 3/8 X 4 1/2 (#23-Labeled
H1
) then up passing between the
Pulley 3/8 X 4 1/2 (#23-Labeled
H2
) and the Cable Retainer Bracket.
B. Next,
route
the
Cable (#11)
down passing between the Pulley 3/8 X 4 1/2 (#23-Labeled
H3
) and the Cable Retainer Bracket,
then route it up passing between the Pulley 3/8 X 4 1/2 (#23-Labeled
H4
) and the Cable Retainer Bracket.
C. Continue
routing
the
Cable (#11)
down passing between the Pulley 3/8 X 4 1/2 (#23-Labeled
H5
) and the Cable Retainer
Bracket.
D. Next, route the
Cable (#11)
under the Pulley 3/8 X 4 1/2 (#23-Labeled
H6
) then to the Pulley 3/8 X 4 1/2
(#23-Labeled
H7
).
E. Route the
Cable (#11)
through the tube of the
Bottom Cross Brace (#6)
then under the Weight Stack and the Pulley
3/8 X 4 1/2 (#23-Labeled
H8
).
F. Next, route the
Cable (#11)
up and over the Pulley 3/8 X 4 1/2 (#23-Labeled
H9
).
G. Affi
x the
Cable (#11)
to the
Weight Stack
using one Split Hex Tap Bolt 1/2-13 X 3 1/2 (#78), one Finished Hex Nut 1/2-13
(#34), and one Split Lock Washer 1/2” (#80). See
FIG. A.
Assembly List
Item #
Description
Qty.
Item #
Description
Qty.
11
MULTI-PRESS CABLE
1
78
SPLIT HEX TAP BOLT GR-5 B/O 1/2-13 X 3 1/2
1
34
FINISHED HEX NUT B/O 1/2-13
1
80
SPLIT LOCK WASHER Z/P 1/2”
1
9
AP-5MPS_AP-5MPD Multi-Press Station
