background image

RZ2 BioAmp Processor Operator’s Manual  

Copyright 

© 2008-2013 Tucker-Davis Technologies, Inc. (TDT). All rights reserved. 

No part of this manual may be reproduced or transmitted in any form or by any means, 
electronic or mechanical, including photocopying and recording, for any purpose without 
the express written permission of TDT. 

Tucker-Davis Technologies 
11930 Research Circle 
Alachua, FL 32615 
USA 

Phone: 386.462.9622 
Fax: 386.462.5365 

Notices 

The information contained in this document is provided “as is,” and is subject to being 
changed, without notice. TDT shall not be liable for errors or damages in connection with 
the furnishing, use, or performance of this document or of any information contained 
herein.  

The latest versions of TDT documents are always online at 

www.tdt.com/support.htm

 

CAUTION

 informs users when failure to take or avoid a specified action could result 

in damage to the product or loss of data. 

WARNING

 calls attention to an operating procedure or practice that, if not correctly 

performed or adhered to, could result in personal injury or death. Do not proceed beyond 
a WARNING notice until the indicated conditions are fully understood and met. 

 

Updated: 1/17/2019 11:37 AM 

 

 

 

 

 

Summary of Contents for RZ2










Reviews: