8
1. First place the Flare Guards into the barbecue.
The Flare Guards are only required beneath the
stainless steel Cooking Grills.
Place the smaller Flare Guards directly above
the burners and place the larger Flare Guards
between the burners as per photos below.
6. Now place the Cooking Grills into the barbecue
above the Flare Guards and place the hot plate
beside the grills.
BARBECUE ASSEMBLY
8. If you have a GTR SS or GTR S Model BBQ,
then you will have a Wok Burner integrated
into the Body of the BBQ. Remove any cable
ties securing the Wok Trivet and then place it
back into position above the Wok Burner.
9. The SS Wok Burner can be fitted with an optional
Hinged Flat Weather Cover/ Lid or a Roasting
Hood to protect it from the weather when not
in use. Read any Assembly, Installation and
Operation Instructions packaged with the
Roasting Hood if provided.
The Wok Trivet is used to support either a Wok or
Pot with a diameter of no less than 230mm.
The SS Wok has an optional Solid Hot Plate
available as an accessory, if you have one
it must be placed directly above the SS Wok
Burner allowing an equal air gap either side of
the Burner when it is in use.
