tuc tuc i-size, Instructions For Use Manual

Page: 60 / 104

60
INTRODUCTION
Dear User,
Thank you for choosing tuc tuc for your 0+1 group purchase. This 0+ 1 group
was designed with the safety and comfort of your baby in mind. This product
was developed following very strict guidelines.
WARNING! For the safety of the child, ensure the child restraint system is
installed and used as indicated in this manual.
Note: Features may vary across the product range.
Note: Please retain this instruction manual and store it in the compartment in
the car seat designed for this purpose.
WARNING! To ensure correct usage of this product, see the car manufacturer›s
manual.
Note: An accident may damage the car seat even if it is not visible to the naked
eye. Change the seat after any accident. If in doubt, contact the retailer or the
manufacturer.
WARNING!
Do not use the restraint system facing forwards until the child is at
least 15 months old and 76 cm tall.
CORRECT IN-CAR INSTALLATION
This is an i-Size child restraint system. It is certified according to Regulation
No. 129/01 to be used with car seats which are i-Size compatible, as noted by
vehicle manufacturers in their user manuals. When in doubt, check with the
child restraint manufacturer or retailer. This restraint system cannot be used if
your vehicle is not equipped with ISOFIX.
You must follow the manufacturer`s recommendations.
WARNING! Cases or other objects which may cause injury in the case of a
collision should be properly fixed in place.
WARNING! Children must not be left unattended in the restraint system. The
sun may cause the plastic components of the child restraint system to overheat,
meaning they become too hot for the child›s skin. Keep your child and the child
restraint system out of direct sunlight, e.g. cover the seat with a light-coloured
cloth. The plastic parts and rigid pieces in the child restraint system must be
positioned and installed so they cannot become entrapped by a moving seat or
ENGLISH