7
Step 8:
Underneath the tower machine are four rubber leg pegs. These are when your
machine is to be used on the counter top with no post. If you are using the
post remove the four rubber leg pegs and set them aside, we will be using
them again shortly.
Note: Notice the Shape that the legs holes are in with two holes closer
together then the other two holes. This Is important because the machine will
only fit onto the post in certain direction. So, spin the tower until the holes are
aligned
Step 9:
Now place the machine on top of the posts
aligning the holes mentioned in step 8
Now you can fasten the machine to the post
using either the 4x rubber leg pegs you removed
in Step 8. Alternatively, you can use the 4x black
bolts the choice is yours
Note: Before fully securing the tower to the tower
plate please make sure to hold on to machine
securely
Summary of Contents for Vending Tower
Page 1: ...1...
