18
Step 5:
If you have removed all the segment
before you go any further, you need to
check to make sure the segments are
aligned correctly.
It is important that you have the
segments positioned correctly in the
positioning part otherwise the products
won’t vend properly and will cause jams
.
Correct Position: the two black pins are in
the middle of the three clear pins.
Incorrect Position: The two black pins over
on either end of the three clear pins.
If this is the case, you need to lift all the
segment up and readjust the segments to
the correct position.
Replace the black centre part on to the
machine and use a 9/16 wrench to
secure the black centre part.
Test the machine to make sure the
segments are turning and that there are
no issues.
Replace the lid and lock the top lid of the
tower using the Silver 100 Lid key a ¼ turn
Summary of Contents for Vending Tower
Page 1: ...1...
