TUBESCA-COMABI NEOLIUM SX, Assembly And Operating Manual

Page: 44 / 224

102-02920515 - ind.C - 11/2021
44
1-5 Safety precautions for erection, modification and use
•
The instruction manual should be available at the site where the mobile scaffolding is being used.
•
The mobile scaffolding should only be used in accordance with this manual, and should not be
modified in any way.
•
The mobile scaffolding should only be used in accordance with national regulations.
•
It should be used intentionally as a means of accessing the working area.
•
All components, tools and other necessary equipment to assemble the mobile scaffolding should be
available at the site.
•
Before assembling the scaffolding, the chosen site should be checked to identify and prevent hazards
during its assembly, modification and dismantling, including, and without limitation:
•
ground conditions;
•
the level of the slope;
•
obstacles;
•
weather conditions;
•
hazardous electrical phenomena.
•
Ensure that all necessary split pins and bolts are firmly in place.
•
NEOLIUM SX should only be erected and dismantled by personnel trained in assembling and using
the mobile tower.
•
User training courses are not a substitute for instruction manuals, but can complement them.
•
Only original TUBESCA-COMABI components, as specified in this manual, should be used.
•
Damaged or faulty components should not be used. Only original TUBESCA-COMABI components
should be used.
•
For assembling each element, refer to the previous diagrams in sections §1-4.
•
PPE (Personal Protective Equipment) must be worn for assembly and dismantling.
•
Stabilisers should always be installed when they are required.
•
Two-person assembly is required.
•
Hauling up items to raise the height of the product can be done from the guard rail side once this has
been installed.
•
Hauling up tools or other items whilst the product is in use can be done through platform access trap
doors.
•
This product should only be used in accordance with the instruction manual.
•
Mobile scaffoldings designed in accordance with EN 1004-1:2020 are not anchor points for fall arrest
systems.
•
Working on a platform is only allowed if there is a complete guard rail consisting of handrails,
intermediate rails and toeboards.
•
After assembly or modification, the following basic information should be displayed on the mobile
scaffolding, and it should be clearly visible from the ground (on a label, for example):
•
The name and contact details of the person in charge;
•
Whether the mobile scaffolding is ready for use or not;
•
The load category and the uniformly distributed load value for the mobile scaffolding;
•
Whether the mobile scaffolding is solely intended for interior use only;
•
The assembly date.