This chapter contains information on;
Connecting the Fusion CD Player to the household mains supply.
Wiring a mains plug (UK)
Your Fusion CD Player plugs into the mains supply via the IEC socket located on the back
panel (see diagram 3). Connect your CD Player to the wall socket using the IEC mains lead
supplied in the packaging. The CD Player has been factory set to the correct mains voltage
for your country. The voltage setting is marked on the serial badge, located on the rear
panel. (See diagram 1). Check that this voltage complies with your local supply. Also make
sure that your mains outlet is able to deliver the required current for the equipment plugged
into it. The wattage rating is also marked on the serial badge.
Mains
Connection
DO NOT CONNECT/SWITCH-ON THE MAINS SUPPLY TO THE CD PLAYER
BEFORE COMPLETING ALL OTHER CONNECTIONS. IF YOU ARE IN ANY
DOUBT REGARDING MAINS CONNECTIONS PLEASE DO NOT PROCEED ANY
FURTHER WITHOUT CONSULTING YOUR DEALER.
Mains
Connection
Export units for certain markets have a moulded mains plug fitted to comply with local
standards. If your mains supply lead does not have a plug fitted, the coloured wires should
be connected to the appropriate plug terminals in accordance with the following code.
Wire Colour
Label on Plug
GREEN/YELLOW
E
or EARTH or
BLUE
N
or NEUTRAL or BLACK
BROWN
L
or LIVE or RED
If your mains plug has a fuse, please fit a fuse with
5A
rating.
If your CD Player is not set correctly for the local supply or if you intend to move the CD
Player to a location where the supply is at a different voltage, please contact your dealer.
Wiring a
Mains Plug
Mains Connection - 5
WARNING - THIS APPARATUS MUST BE EARTHED
The Label illustrated here, informs the consumer that
the unit contains a laser component.
Under no circumstances should covers be removed
when the unit is powered, the Laser can damage your
eyesight.