Tube-Line BF5000S, Operator'S Manual

Page: 21 / 42

Stationary Balefeeder BF5000S -
Section 7: Troubleshooting 7-1
Section 7: Troubleshooting
Round Bale Problems
Problem: The rotors turn, but the bale refuses to turn .
Cause: The platform is not raised high enough.
Remedy : Raise bed to push bale against both beaters. Refer to Feeding, pg.5-2 .
Problem: Several biscuits coming out at once.
Cause: The bed is too high.
Remedy: Lower the bed. The crop material was baled when wet, reverse beaters 2 turns then
forward again. Refer to
Feeding, pg.5-2
.
Square Bale Problems
Problem: Crop material jams between top beater and wiper.
Cause: Too much gap between beater blade guides.
Remedy: Adjust wiper guides. Refer to
Beater Guide, pg.4-2.