1.7. CUTTING THE YELLOW BATTERY WIRE
7
Figure 6: Holes drilled to final size and connectors installed
Ø 14
Ø 14
Ø 3.5mm
Figure 7: Drill aid for midi sockets
Figure 8: Cutting the yellow battery wire
1.7
Cutting the yellow battery wire
If you want to use your SH-1oh1 with batteries the yellow wire coming from
the battery compartment needs to be cut. This makes sure the circuit draws
no power when switched off and increases battery life. Image 8 shows where
to cut. There are two yellow wires: one that connect the upper with the
lower battery compartment. The other one is part of the wiring harness.
Only cut the one which is part of the wiring harness.
