14
The config menu can be entered by pressing the CY.Pulse
button for more then three seconds. The CY.Pulse LED will
start blinking to indicate an active config menu.
To exit the config menu, press the CY-Pulse button again.
Any changed to the configuration will be saved.
When config mode is active, the position of the M.Tune knob
controls if Accent Gate is normalised to ON or OFF (See
chapter ‘Triggers, Accent and Volume’ for details). Turn the
knob to the left half to turn the normalised Accent OFF, turn it
to the right half to turn it ON.
In the config menu additional parameters can be changed,
however currently it contains only one parameter.
The CCs for Decay, Pitch, Spread and Tune are bipolar with
a center of 63 == no change and work in addition to the
knobs anc CV-inputs of the module.
The pulse shaper CC control can be used to turn shortening
of external trigger pulses on or off, identical to the CY.Pulse
button on the module. 0..63 = OFF, 64..127 = ON. Note that
for some instruments (BD, TOMs,..) This can cause double
triggers.
Config Menu
Entering the config menu
Exiting the config menu
Setting the Accent Gate normalisation
