Saving patterns and song
If 6equencer is turned off, the currently programmed
patterns and song is lost unless you manually save it.
To do so, simply press FUNC + SAVE (long-press).
A progress bar in blue will show that the data is saved.
Data can be saved while the sequencer is playing without
performance issues.
When 6equencer is turned on, it will load the previously
saved configuration, patterns and song.
Using 6equencer as a Midi interface
6equencer can also be used as an 8-channel midi interface
to output triggers or gates.
This can simply be achieved by sending Note-On and Note-
Off messages for the instruments (see chapter Midi).
If the Pulse Length setting is set to “Gate”, 6equencer will
react to both Note-On and Note-Off messages, with the
gate staying open from Note-On and closing at Note-Off.
Otherwise it will only react to Note-On messages.
Sending a note with maximum velocity (127) will also trigger
the ACcent channel.
Note that “Clock Mode” must be set to Midi I/O to activate
the midi input.
Tubbutec 6equencer user manual – page 20
