TTW Group mi-witness hd, User Manual

Page: 10 / 40


Precautions before product installation
Mi-Witness HD installation (1/4)
Designed by TTW Group 10
□ Start installation with vehicle turned off after parking it safely, if possible, on flat ground.
□ For your safety, please refrain from installing on the side of the road, especially in busy areas.
□ Please wipe clean the glass of the vehicle, where the sticky pad is to be installed, with an alcohol wipe.
□ Please position this camera where it does not interfere with the driver's field of vision.
□ It is recommended to get this product installed by a recommended professional installer to protect your warranty if hard wiring the
device.
□ Mi-Witness and TTW will hold no responsibility for installations that damage the Mi-Witness HD or vehicle.
□ How to of installing regular power cable
As shown in the figure, starting from the side where this
product would be attached, bury regular power cable along
the front window top of driver seat up to side frame next to
driver's seat. Pull out the cable up to the fuse terminals.
□ How to installing rear camera cable
As shown in the figure, starting from the side where this
product would be attached, bury rear power cable along the
front window top of driver seat or passenger seat up to rear
window passing through the side of vehicle. Pull out the
cable to the position where rear camera would be attached.

Installing power cable and rear camera cable