5
TTL Luftschleieranlagen - Controller UBT2-E
3. Technical data
3.1 Technical data of controller UBT2-E
Electrical connection
data line, factory ready-made with plugs in several lengths,
8-wire, RJ45 (ISDN) plugs, lengths 6, 10, 20, 30, 50 m
Bus system
bus two-core, voltage supply two-core,
2 cores doubled
Interface / bus system
bus, 8-wire with RJ45 8/8 -plugs (2x)
Connections
2x clambs, 3-core, max. 1,0 mm² (room sensor, outside sensor)
Keybord
1 central multifunctional wheel, 2 buttons for ON/OFF and
MODE selection
Display
LCD display, chromatic
Protection
IP 40
Operation temperature
0°C to +45 °C
Storage temperature
-10°C to +60 °C
Installation type
wall mounting, cable insertion from the rear side
(mounting over a blind junction box)
Cover
plastic, gray - front panel/operating surface silver colored
Dimensions (l x h x d)
122,0 x 70,0 x 35,0 mm
Weight
136 g
Conformity
(controller and internal
connection board)
In accordance to
Low Voltage Directive
2006/95/EG
EMC (Electromagnetic compatibility) -com
patible to
EMC Directives
2014/30/EU
In accordance to directives
DIN EN 60335-1 (Safety of electrical units)
DIN EN 60204-1 (Electr. equipment of machinery)
3.2 Technical data for internal connecting board (ASP/PCB)
Connection (power supply).
Fans-connecting box: 230 V AC, 50 Hz, L, N, PE,
clambs max 2,5 mm²
Heating connection: 400 V AC, 50 Hz, L1, L2, L3, N, PE,
clambs max. 4 mm²
Fuse
F 16 AT microfuse
Interface / bus system
bus, 8-wire with RJ45 8/8 -plugs (2x)
Connections, at control side
clambs (numbers see wiring diagram), max. 1,0 mm²
Output messages
operation message (NC), failure mess. (NC)
Inputs
3x (BMS release, external automatic contakt - door,
room sensor) --- to connect potential free
