Trim size : 105*142
Cutting margin : 1mm
the FUNCTION button press.
If you press the PTT button whilst receiving a signal in Dual
Watch Mode the radio will transmit on the currently displayed
channel. If you press the PTT button when no signal is present
the radio will transmit on the primary channel.
Busy Channel Lock Out (BCLO) Mode
Busy Channel Lock Out prevents you from
transmitting when another signal is present.
Three modes are available.
a. Carrier only (CA)
This will prevent your radio from transmitting when a signal is
present on the same channel, regardless of the privacy code.
b. Correct Tone (CT)
This will prevent your radio from transmitting when a signal is
present on the same channel, using the same privacy code as
your current setting.
c. Different Tone (DT)
This will prevent your radio from transmitting when a signal is
present on the same channel, using a different privacy code set-
ting.
To activate and select the BCLO mode. press the MODE button
until the BCLO icon and current setting appear. Use the UP or
DOWN button to change the setting. Press the PTT or MODE
button or wait for 5 seconds to store your choice. A setting of
'Off' will de-activate this mode.
The radio display will alternate between the current channel and
one of the BCLO Mode(CA, CT or DT).
TX-1000U
19
