Trim size : 105*142
Cutting margin : 1mm
code number flash. Use the UP or DOWN button to select the
desired code. Press the PTT or MODE button or wait for 5
seconds to store your choice. The DCS icon will appear when a
Digital Privacy Code is selected.
Once a CTCSS or DCS code has been selected, you can
conveniently deativate or re-activate the tone function.
Press and hold the monitor key to deactivate or re-activate the
tone function. The tone function can only be activated if a tone
code has been selected.
This feature permits selection of the transmit
power level to High or Low.
To change the Power Level setting, press the
MODE button untill the Power Level icon appears. Use the UP or
DOWN button to change the setting. Press the PTT or MODE
button or wait for 5 seconds to store your choice.
The High or Low icon will appear.
Power High / Low
The DTMF tone is a kind of combinations of
short tones. The DTMF tone can preamble to the
message upon every press of the PTT button.
Selecting this allows the other party never to miss your initial
message that might arrive before the audio of the other party's is
open to receive. This can be activated or de-activated.
DTMF TONE
If the compander is activated, your radio will
eliminate the background noise and generate
clearer sound by cutting off the high and low
Compander
TX-1000U
15
