11
TX-150M
E
N
G
L
IS
H
The marine radio service that this radio uses shares channels on
a 'take turns' basis. This means that other users and groups may
be using any channel and privacy code combination.
To communicate with other marine radios, all units must be
switched to the same channel. If the combination you have
chosen is already in use please make an alternative selection.
1. Switch on your radio.
2. Check and if necessary change the channel settings (see
Function Mode).
3. To speak, hold the radio upright, about 10cm from your mouth
and press the PTT. Speak slowly and clearly towards the
radio. Release the PTT when you finish speaking.
You will hear messages from other radios that are within range
and have the same channel setting.
The appropriate icon will appear in the radio display when you
receive or transmit a message.
7. Basic Radio Operation
The function mode allows you to set-up and edit the basic
functions (see Radio Features Explained).
To access the consumer mode, press the MENU button briefly.
Each press of the MENU button steps the radio sequentially
through the different functions. The radio display indicates the
current function. The present setting and associated icon flash.
Use the UP or DOWN button to change the setting. Press the
PTT or MODE button or wait for 5 seconds to store your choice. If
you do not press any key for 5 seconds your radio will return to
standby mode automatically.
8. Function(Menu) Mode