To perform a Priority Search using a
stored channel as the Priority channel:
1) Press
Func MR
to select the Memory
Read mode.
2 ) P r e s s
B a n k / B a n d
t o s e l e c t t h e
required memory bank.
3) Rotate the
Control Knob
to select the
required channel.
4 ) P r e s s
F u n c P R I .
T h e s e l e c t e d
channel is now the Priority Channel.
5) Press the
E/VFO
key to select VFO mode.
6) Press
Band/Bank
to select the required frequency band you
wish to search.
7) Press
Scan/Src.
The receiver will begin searching the selected
Band and will switch to the Priority channel at an interval set by
the ‘Priority Time’ setting in the setup menu.
Notes:
•
If a signal is received, the receiver will remain on the active
frequency for the duration of the ‘Busy Timer’ setting in the
Menu setup. If the ‘Busy timer’ is set to Busy the receiver will
stay on the active channel for as long as the signal is
present.
•
To change the frequency band while searching, briefly press
Band/Bank
key.
•
To change the search direction while searching, rotate the
control knob clockwise or counter clockwise.
1 4
1
4
2
3
2 6
7
5
4
29
TSC-3000R
E
N
G
L
IS
H
