SELECTING FREQUENCIES
The receiver always selects the VFO mode when it is turned on.
You can select frequencies using one of the following methods:
Enter frequencies using the numbered
keypad. Don’t forget to include the
decimal point where applicable.
When you have entered the required
frequency, press the
E/VFO
key to
accept it. If the frequency you have
entered is not within the selected
frequency step, it is automatically
c o r r e c t e d t o t h e n e a r e s t c o r r e c t
frequency.
e.g. Entering 456.25 followed by
E/VFO
results in 456.2500 being
selected.
Direct Frequency Input
1
E
N
G
L
IS
H
18
TSC-3000R
