INSTRUCTION MANUAL
20
ENGLISH
DECLARATION OF CONFORMITY
TSC-100RA
TTI TECH CO.,LTD. head quartered in 4F, JuWon Bldg, 1188 Gaepo-dong, Kangnam-ku,
Seoul, Korea, 135-961 hereby declares under its own responsibility that this receiver
equipment named TSC-100RA is in compliance with the basic requirements and all the
related provisions of the EMC , R&TTE and LVD Council Directive of the EU.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
NOTE :
“Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.”
Weather Band(WX)
Weather Band(WX) Access
7 Weather Band channels are memorized in the memory bank no. 1. Use the memory
Read(MR) button in combination with the Function(F) button to enter the memory banks and
move to the bank no.1 using the Bank, Band button. To find activated weather channels
press the SCAN, SRCH button.
* Weather Channel is available in US version only.
CH
00
01
02
03
04
05
06
Transmit
Weather Channel
Weather Channel
Weather Channel
Weather Channel
Weather Channel
Weather Channel
Weather Channel
Receive
162.400
162.425
162.450
162.475
162.500
162.525
162.550
FREQUENCY (MHz)
The interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
This device compies with Part 15 of FCC Rules.
