INSTRUCTION MANUAL
15
ENGLISH
RECALLING FREQUENCIES FROM THE MEMORIES
1) Press the
E/VFO
key to select VFO Mode.
) Press
Func MR
. The receiver will enter the Memory Read mode.
3) To step through the memory banks press the
BANK BAND
key.
Memory banks are numbered 0 to 9.
4) Select the required channel using the control knob.
CHANNEL SCAN
Use the Scan function to locate active channels among the memorized channels in
one bank.
1) Press
Func MR
to select the Memory Read
mode.
) Press
Bank/Band
to select the preferred memory
bank.
3) Set the squelch level to a point where the receiver
is just quiet.
4) Press
SCAN/SRCH
. The receiver will begin scanni-
ng the selected Band.
n
Selected Bank Scan
1
1
3
4
2
If a signal is received, the receiver will remain on the active channel for the dura-
tion of the ‘Busy Timer’ setting in the Menu setup. If the ‘Busy timer’ is set to Busy
the receiver will stay on the active channel for as long as the signal is present.
To change the bank while scanning, briefly press BANK/BAND key.
To change the scan direction while scanning, rotate the control knob clockwise
or counter clockwise.
Note:
1)
)
3)
The Full Bank Scan function scans the entire memorized channel range for signals.
1) Press Func MR to select the Memory Read mode.
) Press Bank/Band to select the preferred memory
bank.
3) Set the squelch level to a point where the
receiver is just quiet.
4) Press and hold Scan/Srch for seconds.
The receiver will begin scanning the entire full
Bands.
n
Full Bank Scan
1
1
3
4
2
TSC-100RA
