TCB-1100
English 15
9. Trouble Shooting
If you experience problems with your TCB-1100 transceiver, first check
the power supply source. Poor connection of the power supply source
can cause problems such as no transmission, no reception or poor
reception, and weak or no sound. Ensure that the microphone and an-
tenna are also well connected.
If this does not solve the problem, reset your transceiver as follows.
1) Switch off the transceiver.
2) Pressing “9/19” buttons and turn the volume
knob clockwise.
Trouble Shooting
10. CE Declaration
CE versions of the TCB-1100 which display the CE
symbol on the product label, comply with the essential
requirements of the European Radio and Telecommuni-
cation Terminal Directive 1999/5/CE.
This warning symbol indicates that this equipment oper-
ates in non-harmonised frequency bands and/or maybe
subject to licensing conditions in the country of use.
Be sure to check that you have the correct version of this
radio or the correct programming of this radio, to comply
with your national licensing requirements.
0700
+
Trouble Shooting
This unit can be used without license and charges in; Austria, Belgium,
Bulgaria,Cyprus, Czech, Denmark, Estonia, Finland, France,Germanay,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
Malta, Netherlands, Norway, Poland,Portugal,Pomania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, and U.K.
This will reset the transceiver, so all the memories are erased and the pa-
rameters return to the initial factory setting.
This should fix most problems.
In case of further difficulty, Please consult your dealer or visit our website.
11. Safety Requirement
The power cable is for 13.2V DC only. Be sure the transceiver is off
before connecting the leads of the power cable to the power supply. It
is important to observe the polarity even if the unit is protected against
the accidental inversion :
