TCB-1100
English
14
Band Selection
7. How to operate the Transceiver
1) Make sure the microphone is connected to the microphone jack.
2) Make sure the power cable is connected properly.
3) Make sure the antenna is connected to the antenna receptacle.
4) It is better to put the squelch control knob turned fully counter-clockwise.
5) Turn on the transceiver and control the volume level.
6) Adjust the squelch control knob to the optimum level.
7) Select your desired channel.
8) To transmit, press the PTT button and speak to the microphone.
9) Release the PTT button to receive.
8. Band Selection
Pressing “MO/LCR” button of transceiver, turn on
the transceiver. Using the channel selector, select
the band that you are going to select. The LCD
display offers you the band information. The band
chart for each area is as follows.
Press the PTT button of “MO/LCR” button to con-
firm the selection and to return to the stand-by
mode.
This transceiver has “EC” band setting when it is
shipped out from the factory.
Band Selection
+
Setting
Display
Band
F
EC
E
UE(EU/UK
)
PL
UK
I
D
I2
D2
EU
Europe 40 Ch FM 4W
Spain 40 Ch AM/FM 4W
France 40 Ch FM 4W, 40 Ch AM
W
Poland 40 Ch AM / FM 4W
(Polish Frequencies : 5KHz)
UK 40 Ch FM 4W (British Frequencies)
UK 40 Ch FM 4W (British Frequencies)
+CEPT 40Ch FM 4W(EC) + CEPT 40Ch FM
Italy 40 Ch AM / FM 4W
Italy 34 Ch AM / FM 4W
Germany 80 Ch FM 4W, 12 Ch AM
W
Germany 40 Ch FM 4W, 12 Ch AM
W
Europe 40 Ch FM 4W, 40 Ch AM
W
