ENGLISH
16
Privacy Code (CTCSS/DCS) Scan and Decode
Privacy Code Scan is used to determine which Privacy Code is in use
on the current channel.
To activate the privacy code scan press the MODE button until the
privacy code number flashes, then press the SCAN button briefly. The
Scan icon will blink when the privacy code scan is active.
The radio will scan through the 38 CTCSS and 104 DCS codes. If your
radio detects a valid signal the scan will pause for 5 seconds.
If you press the PTT button when your radio detects a signal, the radio
will transmit on the same privacy code and the privacy code will be
automatically selected.
If you press the PTT button during scanning, the radio will return to
your original privacy code. Scanning will resume when the PTT button
is released.
To stop scanning, press the SCAN button again.
To increase battery life use the scan modes sparingly.
Battery Level
The Battery icon indicates what the current battery level is and when
the battery needs recharging. If necessary, refer to the instructions to
recharge the battery.
Scan Memory
To memorized and erase the displayed channel in the scan memory
list, press and hold this button. For user convenience, all the channels
are memorized upon shipment from the factory.
Keypad Lock
To toggle the key lock, press and hold the KEYPAD LOCK button. The key
lock icon appears when the lock is activated. All the buttons and keys are
locked and diactivated except for the PTT, power on/off and Volume.
If you press the PTT button when your radio detects a signal, the radio
will transmit on the same channel. Scanning will resume after
approximately 15 seconds. Press the UP or DOWN button to resume
scanning immediately.
If you press the PTT button during scanning, the radio will return to
your original channel. Scanning will resume after approximately 15
seconds.
