Priority Channel Mode (Advanced mode only)
A 'Quick Access' Priority Channel is available by briefly pressing
the KEYPAD LOCK button. This can be used as a reserve or
secondary channel.
To program a Priority Channel, press the MODE button until the
Priority Channel icon and current channel setting flashes. Use the
UP or DOWN button to change the channel setting. Press the PTT
or MODE button or wait for 5 seconds to store your choice.
The Priority Channel icon will appear when the Priority Channel is
selected.
Dual Watch Mode
Dual Watch mode allows you to monitor two channels; a primary
channel and the dual watch channel. When a signal is received on
either channel the unit will pause for 5 seconds before resuming
the dual watch.
Priority Channel Scan Time
When the Priority Channel is selected, pressing the SCAN button
toggles the Priority Channel scan.
Priority Channel scan is similar to channel scanning, however the
priority channel is scanned in addition to the other channels. You
can select how often the priority channel is checked according to
your needs.
To select the Priority Channel Scan Time, press the MODE button
until the Priority Channel Scan Time icon and current setting
flashes. Use the UP or DOWN button to change the priority
channel scan time. Set the scan time to '1' for most frequent and
'5' for least frequent. Press the PTT or MODE button or wait for 5
seconds to store your choice.
Each number represents a half second, so a setting of '4' will
result in the priority channel being checked every 2 seconds. A
setting of '1' will cause the radio to scan the priority channel
alternately with the other channels, e.g. channel 1, priority
channel, channel 2, priority channel etc.
ENGLISH
16
TX-1446 plus
Summary of Contents for TX-1446 Plus
Page 1: ...PMR 446 TRANSCEIVER INSTRUCTION MANUAL www ttikorea co kr...
Page 26: ......
