7/15
2.
BATTERY INSTALLATION
Your radio equipment is designed to operate both in four “AAA” size
rechargeable Ni-MH battery(optional) or Alkaline batteries(not supplied).
Cautions
Never attempt to charge Alkaline or Dry Cell Batteries. When recharging the
rechargeable batteries, use only recommended ones. Use of other batteries may
cause damage to your radio equipment.
Installation of the batteries
*Ensure that the radio equipment sets to power off.
*Hold the radio and battery cover with the back facing you.
*Press and slide the battery cover.
*Install four “AAA” Ni-MH batteries or Alkaline batteries.
Note
: Carefully observe the polarity of the batteries before installing.
*Replace the cover
3.
BASIC OPERATION
In order to communicate with other FRS units, both you and the receiving party
must be on the same channel. PMR-101TX has 8channels indicated by the large
digits on the LCD display panel. Before trying to transmit on the selected
channel, you should press the Monitor Button to check the activity on that
channel. If someone is already on the selected channel, you should try another
channel that is clear.
1)
On/Off & Volume control Switch
* Radio ON: Press the power button at least for 2 seconds. You will hear
confirming melody to indicated the unit is on.
* Radio OFF: Press the power button at least for 2 seconds.
Voice Operated Switching (VOX) Indicator: This function
allows handsfree conversation. The Icon appears when the
VOX mode is activated.
Out of Range Alert Indicator: Icon appears and blinks as
the receiving signal is getting weaker. The Icon disappears
when the receiving signal comes back to normal status.
