01 and 05, and an appropriate call ring.
- Press the Up or Down button to preview and hear the 5 available call
melodies.
- Momentarily press the PTT button to confirm your selection.
VOX Selection Mode
This option enables you to have hands-free conversation. Your
voice or other relatively loud noises are detected and the radio
transmits without the need to press the PTT button.
To set radio for VOX operation,
- From standby mode, press the VOX button;
Vo
appears steady and
VOX
icon and sensitivity level (if VOX is enabled) flashes on the
display.
- Press the Up or Down button to select the desired VOX sensitivity
level (05 is the most sensitive, 01 is the least sensitive,
oF
represents off).
- Momentarily press the PTT button to confirm the VOX selection.
- The
VOX
icon will appear steady on the display whenever the
VOX feature is in use.
VOX can be turned off by selecting
oF
as the setting.
Scan Operation
This feature allows you to monitor all channels automatically for
valid signals. While scanning, you can transmit and receive. During
reception, the scan function is interrupted and will return to the scan
mode after 10 seconds. To enable the channel scan mode,
- Momentarily press the SCAN button;
SCAN
will appear on the
display.
- The radio will display each channel (01-08) in order as the scan
mode operates to find an active main channel.
When unit doesn’t find any signals and you want to transmit, press
the PTT switch to return to home channel operation. The transceiver
will automatically resume scanning approximately 15 seconds
after the transmission is completed.
- If there is no activity and you want to leave the scan mode, press
the SCAN button momentarily and the unit will return to normal
operation;
SCAN
icon will disappear from the display.
-
Call ring can be turned off buy selecting
oF
as the setting.
-
