Beep Tone
This feature allows the transceiver to sound a tone whenever the
following keys are pressed: Up/Down buttons, VOX button, MODE
button, SCAN button, Monitor (MON) button, Memory (MEM1/MEM2)
button, or Power button.
To turn the beep tones on or off:
- From the standby mode, press the MODE button 5 times until
bp
,
the Bell ( ) icon, and
On
or
oF
flash on the LCD display.
- Press the Up or Down button to toggle the key tone feature
On or Off.
- Momentarily press the PTT button to confirm your selection.
When enabled, the bell icon appears steady on the display.
Memory Selection
The Memory function allows you to store a channel so that you can use
the stored channel when needed by pressing the
MEM1
or
MEM2
button.
- From the standby mode, press the MODE button 6 times until
MEM1
icon appears on the display with the flashing MEM1 icon.
- Press the Up or Down button to select a channel.
- Momentarily press the PTT button to confirm selection.
NOTE
: To use the stored channel, press the "
MEM1
"
button, then you
will be able to see the stored channel and
MEM1
icon on the display.
* While the memorized channel is working, the SCAN and
MODE buttons are locked. To unlock the buttons, press the
MEM1
button one more time. The radio goes to the home
channel and the buttons are unlocked.
To select or exit
MEM2
, press the Mode button 7 times until
MEM2
icon appears on the display, and repeat the same process as done
in
MEM1.
Call Ringer Selection Mode
The transceiver provides 5 user-selectable call ringer melodies to alert
you to an incoming call.
To select your favorite call ringer melody:
- From the standby mode, press the MODE button 8 times;
C
will
appear on the display, together with a flashing number between
