TTF Limo-GT, Service Work Instructions

Page: 21 / 35

Common controller errors
●
Error 47/Put 0: Correct starting procedure has not
been followed. Put DNR back in N, close throttle
to clear error. If this does not help, verify inputs
(next slide).
●
Error 23: Usually an empty battery. Recharge. If
this does not help, check battery health.
● Error 12, 36, 73: Encoder fault. Clean encoder and
check encoder connection.
●
Error 38: Main contactor did not close . Check and
clean connections of main contactor and main
fuse. Check battery health.
● Error 22/C hot: Controller gets hot. See Slide 39
●
21