Beijing TT Aviation Technology Co., Ltd.
Add: No.1 TTA Building, Niantou Industrial Park ,Changping District,Beijing, China
www.ttaviation.com
50
the bottom, ”Point B memorized”.After that,the LED flash purple 2 times at a time.
The GCS have voice prompt.
4) Switch G lever to select spraying mode,
auto-controlled or manual-controlled.
Press A button ‘Flow Rate’ to open spraying function.
5) Select the spraying direction. Switch E (Flight mode) to AB mode. Move the roll
joystick to select the roll direction.
If move the joystick to left side, then the drone rolls to the left,and starts to fly along
the route.If move the joystick to the right, the drone rolls to the right side,and
starts to fly along the route.While the drone doing AB point flight mode,the user can
stop controlling the joystick.
Interval width can be set in Agriculture settings of GCS.
7.32 AB Mode adjustment
①
Altitude correction:Control the flight altitude by the throttle joystick, “up” for the
drone to rise, the “down” for the drone to set ;
②
Correct the the rudder to control the direction;
③
Extension the length of route: while the drone fly to a point nearby the extended
position, control pitch stick to fly further. Drone will fly in a 2-meter speed. Release
the pitch stick when drone almost reach at the extended position.
④
Shorten the length of route: while the drone fly to a point nearby the shorten position,
control pitch stick to fly further. Drone will fly in a 2-meter speed. Release the pitch
stick when drone almost reach at the extended position.
Roll to left
Roll to right
Points of route
Interval width
Flight direction