Beijing TT Aviation Technology Co., Ltd.
Add: No.1 TTA Building, Niantou Industrial Park ,Changping District,Beijing, China
www.ttaviation.com
48
7. Non-Autonomous Flight Modes
7.1 Altitude Mode
GPS is not used for positioning and drone can only stay at a certain altitude. Altitude mode
is the safest mode by only depending on IMU of flight controller, not affected by any other
sensors.
In altitude mode, drone can not positioned,which may result in horizontal shifting. User
need to control drone by RC constantly.
Working conditions:
After the flight controller is initialized, user can unlock drone when the LED light flashes
green quickly. In altitude mode one green LED light flash at a time.
Operation Introduction:
1. Push the E lever to chose altitude mode and unlock drone. Motor is on idle speed
mode if throttle is on on neutral position. Drone will take off by gently pushing throttle
beyond neutral position. Drone will stay at a certain height during flying if throttle is back to
neutral position.
2. User can take over drone and break auto-route mission by switching to altitude mode.
7.2 GPS Mode
In GPS mode, drone will use GPS module to position precisely. Therefore, drone is able to
stay on a certain height and a certain point.
Working conditions:
Drone can not take off unless GPS module has searched enough satellites and only green
light is flashing. In GPS mode green LED light will flash two times constantly at a time.
Operation Introduction:
After researching satellites and positioning completely, switch E lever of RC to GPS mode
and then unlock drone. Motor is on idle speed mode if throttle is on on neutral position.
