background image

Technical Support

In the unlikely event that you encounter a problem with your SnapNType keyboard, 
please contact technical support at [email protected].  For the most update 
SnapNType driver or more FAQ, please visit http://www.tt-tec.com.

FCC Regulatory Notice

This device complies with part 15 of the FCC rules.  Operation is subject to the 
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may 
    cause undesired operation

.

c

  2002 TT Tech Ltd. All rights reserved. 

SnapNType is trademark of TT Tech Limited.

Compaq and the names of Compaq products referenced are either trademarks

and/or service marks or registered trademarks and/or service marks of Compaq.

iPAQ is a trademark of Compaq Information Technologies Group.

What should I do when I type on the keyboard and nothing happens?

- Check that your iPAQ is charged and working properly
- Make sure your iPAQ is connected to the SnapNType securely
- Make sure any other Keyboard programs are disabled
- Verify that the SnapNType software is installed
- Confirm that the SnapNType driver is enabled
- Test typing on the Test Area

Frequently Asked Questions (FAQ)

Do I need to disable the SnapNType driver each time I finished using it?

No, you can leave the driver turned on as long as you do not have another application 
that will use the same serial port.

Will ActiveSync be affected?

The SnapNType is fully compatible with ActiveSync. You can leave the driver enabled 
and synchronize as usual.

Can I send and receive Infrared while using the SnapNType?

Yes, Infrared will not be affected.

Can I use the stylus while using the SnapNType?

Yes, you can use the stylus and keyboard simultaneously.

Can I use the SnapNType while using other expansion packs?

Yes, as long as the expansion pack do not use the same communication port, the 
SnapNType can be used together with any expansions packs. Otherwise, you will have
to switch between the SnapNType and the expansion.

Summary of Contents for SnapNType











Reviews: