Please read all the instructions and familiarize yourself with the product and its controls before operation.
1. This product is not a toy. It is a high performance model car therefore it is important to familiarize yourself with the model, its manual,
and its construction before assembly or operation. Adult supervision is necessary for children operating this model.
2. Always keep this instruction manual on hand during assembly and for operating reference.
3. Do not use a power screwdriver to install screws into plastic parts. A power screwdriver's high rotation speed can heat up the screw
being installed which can result in some melting of the plastic parts or stripped threads.
4. For best performance, it is important to make sure all the moving parts can move freely without binding.
5. This product, its parts, and its assembly tools can be harmful to your health. Always exercise extreme caution when assembling and
operating this product. Keep away from any high speed rotating parts during operation.
在您開始操作本產品之前，請詳閱本產品說明書。
1. 本產品為高性能模型產品非一般玩具，組裝與操作過程皆需由成人陪同。
請詳讀此本使用說明書，避免因組裝錯誤與操作不當造成損壞。
2. 請妥善保管此說明書，對於後續維修、操控說明將可提供您協助。
3. 請勿使用電動工具旋緊自攻螺絲於塑膠零件上，可能導致塑膠零件融化或滑牙。
4. 請檢視所有活動部位零件是否不受干涉、可靈活作動，以達車輛最佳性能。
5. 此項商品具有相當之危險性，於組裝、操控上的不熟悉都可能造成自身或他人的傷害。
STEP 1 DIFFERENTIAL
差速器 -------------------------------------
P3
STEP 2 GEAR BOX SET
齒輪箱組 --------------------------------
P4
STEP 3 MOTOR DRIVE SET
馬達傳動組 -------------------------
P5
STEP 4 REAR SUSPENSION
後擺臂 ------------------------------
P6
STEP 5 REAR SHOCKS
後避震器 ---------------------------------
P6
STEP 6 EXHAUST PIPE
排氣管 ------------------------------------
P7
STEP 7 SERVO
伺服器 ---------------------------------------------
P7
STEP 8 STEERING ROD
轉向拉桿 --------------------------------
P8
STEP 9 FRONT SUSPENSION
前擺臂 -----------------------------
P8
STEP 10 BODY ASSEMBLY
車主體 ---------------------------------
P9
STEP 11 ESC AND RECEIVER
電子變速器與接收機 -------------
P10
STEP 12 DRIVER SET
駕駛人偶 -------------------------------
P10 . P11
STEP 13 ROLL CAGE
防滾籠 ---------------------------------------
P13
STEP 14 SHOCK MOUNT
避震器架 --------------------------------
P14
STEP 15 FRONT SHOCKS
前避震器 --------------------------------
P15
STEP 16 FRONT STEERING KNUCKLE
前轉向輪座 ---------------
P15
STEP 17 REAR KNUCKLE
後輪座 ----------------------------------
P16
STEP 18 TIRES AND WHEELS
輪胎與輪框 ------------------------
P16
STEP 19 TIRE
輪胎 --------------------------------------------------
P17
STEP 20 BATTERY
電池 ----------------------------------------------
P17
PARTS LIST
零件表 ----------------------------------------------
P18 . P19
Hex Driver Tool Set
( 1.5/2.0 )
六角板手組
SAFETY PRECAUTIONS
安全注意事項
2 >>>
INDEX
索引
TOOLS REQUIRED FOR ASSEMBLY
組裝維修工具
SYMBOL REFERENCE KEY
說明書符號說明
Build right and left assembly
組裝左和右配件
Build front and rear assembly
組裝前和後配件
Assemble the parts two times
組裝相同配件兩次
Assemble the parts four times
組裝相同配件四次
Xwrench
十字套筒
