Copyright © 2017 TTA All Rights Reserved.
M8A pro Use Introduction
33
6.2 Bind
Power on the remote controller first. Power on drone for 1 second and cut off
immediately, repeating this step for three times. Then power on the drone for the
fourth time and keep the power connection. The done will enter into binding mode
automatically. Drone will bind the remote controller successfully with a voice prompt.
Remote controller need to be calibrated after binding.
Remark: Binding remote controller can not be operated for more than one pair at the
same time. Only one-to-one pairing is allowed.
6.3 RC connection and Device Helper.APP Introduction
1).Turn on remoter controller ( short-press + long-press ). Open bluetooth, search and
connect bluetooth of remote controller ( T12-*** , password: 1234).
2).Device Helper introduction.
ADJUST PARAMETERS -------- Adjusting channels, rudder value, fail-safe value.
OTHER OPTIONS --------- Selecting SBUS or PPM output mode of receiver, and
telemetry baud rate.
HAND SETTINGS -------- Select hand mode, USA, Japan ect.
UPDATE DEVICE -------- Update firmware online
Connection mode --------- Bluetooth mode, SBUS receiver mode.
Cautions: Don’t do any adjustment, unless under professional introduction. Otherwise,any
consequences caused are undertaken by its users.
