Copyright © 2017 TTA All Rights Reserved.
M8A pro Use Introduction
17
Figure 5-2
5.2 Parameters Adjustment
Sensitivity should not be changed by common user,the unnecessary
loss should be taken by user for authorized changing.
Remote controller could not unlock before parameters adjustment.
Exit could only be done when all of the parameters adjustment
should be done and confirmed.Copter could only fly by restarting after
parameters adjustment.
Parameters could be adjusted when copter connected,the steps are as followings:
1) Open the OTG function from cellphone SETTINGS---SYSTEM---OTG(the default
is Off thus it should be opened every time),see figure 5-2-1.
