TSUNESS TSOL-H3.0K-H, User Manual

Page: 47 / 58

43
10 CEI0-21
11 NRS097-2-1
12 VDE0126-Greece-Island
13 CQC
14 IEC61727-In
15 G59-3
16 VDE0126-Greece-Continent
17 France-VFR2014
18 France-Island-50Hz
19 France-Island-60Hz
20 AS4777-NZ
21 Taiwan
7.3.8 Work Mode
There are five work modes for choice.
Parameter Comment
Self Use
(default)
The PV generated power will be used to supply the local loads
firstly, then to charge the battery. The redundant power will export
to the public grid.
When there is no PV supplied, battery will discharge for local
loads firstly, and grid will supply power when the battery capacity
is not enough.
Force Time Use
In this work mode the charging and discharging time can be set
flexibly, and it also allows to choose whether charge from the grid
or not.
Back Up Mode
Battery will stop discharging to keep higher capacity when the grid
is on. Only when the gird is off and PV energy is not enough,
battery will start to discharge to keep the emergency load working
normally. This work mode applies to the area where suffering from
blackout regularly.
Feed in Priority
The priority of inverter output power is: feeding to the grid→
supplying the load→ charging the battery.
This work mode applies to the area with high feed-in tariff.
Peak Valley Mode
Charge the battery according to the set power within the set
charging time, During the set discharge time, the battery is
discharged according to the set power. Other time according to
Self Use mode.
7.3.9 Battery Parameters
The Battery parameters setting contains five items: battery t ype, battery capacity (AH),
constant charge voltage, max soc (only for lithium)/charge cut -off volt age (only for lead crystal),
min soc (only for lithium)/discharge cut-off voltage (only for lead crystal).
Note: Current support PYLON US2000 high voltage lithium battery and lead crystal battery.
7.3.10 Export Limit