Page 10
Page 11
»
Make sure the surface is clean and dry in the installation area. Remove the red film
from the adhesive mount. Position the camera on the windshield with the lens pointing
forwards and adjust the angle by rotating the camera body.
»
Turn on the ignition. The camera should power up and start recording automatically.
»
Rear Camera:
The external camera mounts to the inside of the rear window with
an adhesive pad. Centre the camera at the top of the window and adjust the angle
appropriately.
»
Plug the power cable into the USB port on the camera. Route the cable neatly around
the edge of the windshield by tucking it into any available gap in rubber seal, roof liner
etc. Continue around the dashboard towards the 12/24v socket.
Summary of Contents for L-70
Page 1: ...Page 1 ...
Page 12: ...Page 12 1 Up 2 Menu 3 Down 4 OK 5 Mode 6 Hold 5 Product Overview ...
Page 13: ...Page 13 7 USB 8 Mount 9 AV Rear Cam 10 Power 11 SD card ...
Page 24: ......
