3
6. Remove outer links until you have the intended number of links.
7. Insert the latch on the
outside of the outer link
into the gap on the outer
face of the inner link.
8. Press the latch on the inside of the outer link in while inserting it into the gap on the
inside of the inner link. Take the outer and inner links between your fingers and snap
together.
Attach all inner links to the outer links on the opposite side in the same way.
9. Attach a bracket to the outer links on the opposite side in the same way.
10. Attach arms and bracket arms (inner/outer side).
No.CV-MT09-001
Issued
May 2013 ©Tsubakimoto Chain Co.
*Use a clipper or box knife to cut as per the diagram below.
(The cut end of the link element should be 1mm or less)
Cut outer links at one of
these points
