1
Tsubaki
TKR15H22
Plastic Cableveyor®
Tsubakimoto Chain Co.
1 Extending Links
1. Remove all the bracket inner/outer side arms and all arms from the bracket to the first outer link connection. Remove an
additional two arms from that point back as well.
2. Remove the brackets
A)
Remove the inner/outer side arms*,
insert a flat head screwdriver in the
gap of the bracket on the outer side
face, and pry in the direction of the
arrow to unlatch.
B)
Repeat A on the inner side to
remove the bracket on one side.
C)
Repeat steps A and B on the
opposite side to remove that
bracket.
Instructions for Extending Links
*The outer link is unlatched when it lifts up ~2mm.
A. Insert a flat head screwdriver into the gap on the side
face of the inner link and pry in the direction of the
arrow to unlatch.
B. Open the arm and pull it along its axis.
C.
Pull until it is vertical, then pull laterally to remove.
Connection
