TST-770 WSD Full Line Manual-RevA
© 2021 Truck System Technologies and Pressure Systems International Inc. All Rights Reserved Worldwide.
(770) 889-9102 M-F 9-8pm, Sat 9-2pm EST
Page 7
MAIN SCREEN
Remove protective film from Display by lifting the tab in the upper right corner.
Slide power slide switch to ON position.
Startup Screen
will appear after ~5 seconds, followed by the
Settings Icons Screen
or, if sensor(s) are already programmed, the Power Unit/Trailer
Main Screen
will appear
after approximately 5 seconds.
If no sensors are paired to the Display, the
Settings Menu Screen 1
will change to the
Power Unit/Trailer
Main Screen
after approximately 1 minute, 30 seconds.
Note:
When the display receives the paired sensor information, the corresponding pressure
and temperature data will be displayed on the Power Unit/Trailer
Main Screen.
Settings Menu Screen 1
(if no sensors are programed)
Power Unit/Trailer
Main Screen
(appears after 1 minute, 30 seconds)
GPS Interface Screen
(left and right arrows bring up GPS)
Power Unit/Trailer
Main Screen
(if sensors already programed)
Startup Screen
Touch
or
to switch between Power Unit/Trailer
Main Screen
and
GPS Interface Screen
(this is not a navigation tool)
.
Please allow up to 15 minutes for the
GPS to initialize the first time
.
Back To
